Towing a dinghy with engine retarder on

  • 11/04/2012 5:06 PM
    Message # 1126311
    Deleted user
    We have a 2012 Expedition with dinghy set up with the Invisibrake.  The Invisibrake is activated on the dinghy when the coach's brake lights go on.  My question is when the retarder activates do the coach brake lights go on, thereby activiating the Invisibrake?  Is it OK to tow with the retarder activated?  The Invisibrake will go off after 15 seconds and after 20 seconds it will beep a warning signal.
  • 09/11/2013 1:17 PM
    Reply # 1386663 on 1126311
    Deleted user

    We have a 2013 Expedition and tow a 2004 PT Cruiser on a dolly with a Tekonsha P3 brake controller. 

    On mine, the brakes lights do not come on when the engine retarder is functioning.

    I can tell because the P3's screen shows when and how hard the dolly brakes are being applied when I apply the coach's brakes.  By watching the P3's screen I can see that when the engine retarder is functioning the dolly brakes are not being applied.

    Harv

    Last modified: 09/11/2013 1:48 PM | Deleted user
  • 09/14/2013 2:38 PM
    Reply # 1389269 on 1126311
    Deleted user
    Thanks for the reply.  I discovered that the engine retarder on mine activates the brake lights, thereby activating the invisibrake.  I have learned to downshift when going down hill vice using the retarder.
  • 10/09/2013 12:29 PM
    Reply # 1408646 on 1126311
    Deleted user

    Your retarder is not connect to any light power wires. It comes when turned on. And off when turn off or brakes are applies. On my American Dream 



©2023 all rights reserved, Fleetwood Motorhome Association.                                                                             Contact Us | Privacy Policy

Powered by Wild Apricot Membership Software